15 HP Rotary Screw Air Compressor TM | QRS 15 HP TM



SKU: 4152010532 Categories: , , ,


[vc_row][vc_column width=”1/2″][vc_column_text]

Belt Drive Rotary Screw Air Compressors

QRS 3 to 15 HP and QRS 3 to 15 HPD

The Quiet Rotary Screw (QRS)

Compressed Air System

Engineered for high performance, efficiency and reliability, the

Chicago Pneumatic line of QRS (Quiet Rotary Screw) air compressors

can meet the compressed air demands of a tire shop, maintenance shop,

vehicle body shop, paint shop or automotive dealership. With its whisper

quiet design the QRS can be installed almost anywhere, and is offered with

an optional mounted dryer (with tank mounted option only). The QRS is

the leading rotary screw compressor for light industrial applications.[/vc_column_text][/vc_column][vc_column width=”1/2″][vc_single_image image=”329615″ img_size=”full”][/vc_column][/vc_row][vc_row][vc_column width=”2/3″][vc_single_image image=”329616″ img_size=”full”][/vc_column][vc_column width=”1/3″][vc_column_text]Standard Features:

• Low sound enclosure

• 150 psig standard (125 psig available 10-15 HP)

• Continuous operating capability

• 60 gal. ASME/CRN receiver tank (3-7.5 HP Tank

Mounted Version)

• 120 gal. ASME/CRN receiver tank (10-15 HP

Tank Mounted Version)

• Single phase 230 TEFC motor (3-7.5 HP)

• 3-phase, 208-230/460V and 575V, TEFC Motor

• Start/stop operation – QRS 3.0 – 7.5 HP 3-phase

• Load/no-load operation with timed shutdown –

QRS 5.0 – 7.5 HP single phase and

QRS 10-15 HP 3-phase

• UL and cUL approved control panel

• 5 year warranty with authorized start-up

• Spin-on oil filter and separator

• NEMA 1 electrical protection

• Vibration isolated assembly[/vc_column_text][/vc_column][/vc_row][vc_row][vc_column width=”1/2″][vc_column_text]

QRS 20 to 30 HP and QRS 20 to 30 HPD

The QRS 20-30 is a rugged, rotary screw compressor that

combines proven design with superior performance. Ideal for

automotive and industrial applications, the QRS is engineered

and built to support the most demanding requirements. Every

QRS 20-30 can be supplied either base mounted or tank

mounted on a 120 gallon receiver tank, and with or without

an integrated air dryer. This option can save vital floor space

and provide a continuous supply of quality compressed air.

Installation into every application is quick and easy – simply

supply power to the electrical panel, connect your discharge

piping and you’ll have instant access to high quality compressed

air.[/vc_column_text][/vc_column][vc_column width=”1/2″][vc_single_image image=”329617″ img_size=”full”][/vc_column][/vc_row][vc_row][vc_column width=”1/2″][vc_single_image image=”329618″ img_size=”full”][/vc_column][vc_column width=”1/2″][vc_column_text]

Standard Features:

• Low sound enclosure

• 100, 125, 150 and 175 psig

• Wye-Delta, reduced voltage start

• ES3000 microprocessor controller

• Continuous operating capability

• 3-phase, 208/230/460 and 575, TEFC Motor

• Space saving design, <12 sq. ft.

• Load/no-load with intelligent shutdown

• Spin-on oil filter and separator

• NEMA 1 electrical protection

• Vibration isolated assembly

• UL and cUL approved control panel

• 5 year warranty with authorized start-up[/vc_column_text][/vc_column][/vc_row][vc_row][vc_column width=”1/2″][vc_column_text]

Additional Features and Benefits

(Integrated Dryer and Tank Mounted Options)

• Compressed air enters the QRS where it is triple-filtered

before it enters the dryer.

• The QRS is completely piped, wired and installed adjacent to

a CPX non-cycling, refrigerated dryer.

• The dryer is powered by separate 115V / 1~ power and

comes with electro-pneumatic controls for simple operation

and trouble shooting.

• Condensate is extracted from the compressed air by the

dryer and is removed by a zero loss electronic drain. The

compressed air then passes from the

dryer to the receiver tank.

• Air stored in the receiver tank is clean and dry so internal

rust is minimized and downstream applications are not

polluted. The 120 gallon receiver tank is ASME/CRN

approved and supplied complete with manual tank

drain and safety relief valve.[/vc_column_text][/vc_column][vc_column width=”1/2″][vc_single_image image=”329619″ img_size=”full”][/vc_column][/vc_row]



The CP Compressor Guarantee

Chicago Pneumatic (CP) is dedicated to providing high quality, reliable equipment that has stood the test of time as one of the most rugged compressors in the market. Our compressors are 100% factory tested, and we stand behind our products with one of the most competitive warranties in the industry!

    • All rotary screw 1 Year with option to extend to 5 Years*
    • Two-stage reciprocating** 2 Years
    • Single-stage reciprocating 1 Year

*Screw compressors are supported by our CP Secure 1-Year Warranty with the option to extend to a full 5-year warranty (authorized start-up required and regular maintenance with factory authorized fluids and parts).


**Excluding Two-stage Gasoline Drive Contractor Series which are covered for 1 year.

CP compressors are supported by a network of trained service technicians who can provide complete warranty support, spare parts and technical consultation. For more information on our products, please contact your CP territory sales manager or a local authorized CP distributor.


Free Shipping:

  • All Rotary Screw Compressors and other compressors over $2500.
  • Orders totaling in the amount over $375.00 (excluding tax & Freight Shipped Items) are eligible for free shipping.
  • Orders totaling over $3975.00 that include Freight Shipped Items are eligible for free shipping. *Freight Shipped Item are any item considered too large for conventional shipping (ex. Aluminum Piping). This offer is not valid for Alaska or Hawaii.